Greenlee 11170 Deburring Tool

5 Customer reviews


  • Works with any hole size or shape 3/4" or larger
  • Use with existing drills, battery or electric powered
  • Ensures safety, less chance of personnel or equipment being cut on sharp edges

Product description

33-0 Features: -Cleans burrs from both sides of the hole in seconds. -Works with any hole size or shape 3/4'' or larger. -Operation - run tool clockwise to deburr, counterclockwise to clear chips. -Cutting Diam: 3/6 in. Number Of Bits: -. Dimensions: Overall Product Weight: -0.35 Pounds.

From the Manufacturer

's deburrs up to 0 gauge material types include mild and stainless steel, copper, brass and aluminum.

Customer reviews(5)

Write Review
H. Soli
January 16, 2015
I used it for the first time today. It was on a stainless enclosure, 1/8" thick. The deburring tool removed the sharpness left by the cutter but did not remove the rim that had formed ... so the lock-nut wouldn't go flush to the enclosure.
As I experiment with it more, I will update this review if there's anything meaningful to add.
Note my photograph. The O.D. of the tool is greater than 3/4". A spare set of cutters was included in the package. I know 3 pair refill packs are out there too.
As an aside, I tried it on some aluminum that was thicker than the manufacturer suggests. That didn't go well.

I'm back. I removed a star, although I was inclined to remove two. I took it out of my toolbox today. It's likely going into the trash. I've given it a thorough workout and find myself totally disappointed.
February 9, 2015
Sweet tool. Makes the other chumps at work look like suckers cuz I can knockout cuts like a boss with equal chamfers. And I'm done in 1/3 the time.!
Saden Shard
November 16, 2015
A little disappointed for a Greenlee product. It starts to dull very quickly. It does do a nice job though on larger holes though.
Jason Brenstuhl
September 4, 2018
As listed
Timothy Hake
February 21, 2016